Motors · Controllers · Integrated Drive Units

FOC Motor Controllers & 3-in-1 E-Drive Units (48–96 V)

From 0.7 kW to 220 kW, Vector supplies in-house motor controllers, co-developed motors and 3-in-1 drive units to OEMs building electric motorcycles, three-wheelers, micro EVs, off-road vehicles, marine craft and utility equipment.

Vector 3-in-1 motor, controller and reducer drive unit

0.7–220 kW

Power range across in-house controllers and co-developed motor platforms

8 × 20

Controller ratings × motor platforms to match each application

95%

Peak efficiency of the 3-in-1 drive unit

16

Patents filed, 6 of them already granted

Products

From a single controller to the complete powertrain

Every product is configured and calibrated for the target vehicle or machine. VCU and keyless-entry (PKE) electronics are available to complete the system.

Motor Controllers

In-house · T Series

Motor Controllers

Ten ratings (T-150 to T-2200) from 2.0 to 40 kW rated and up to 79 kW peak, all running sensored–sensorless dual mode with automatic fallback.

  • 48–72 Vdc; T-1500 / T-2200: 72/84/96 Vdc
  • Up to 2,200 A peak phase · CAN / RS-485 / UART / SIF (by model)
  • Hall / GMR encoder, SIN/COS on T-1500 / T-2200
Controller details
3-in-1 Drive Units

Integrated drivetrain

3-in-1 Drive Units

Motor, controller and reducer in one housing: shorter, lighter and far fewer interfaces to integrate.

  • 5 / 10 / 30 kW power classes
  • 180 / 250 / 400 N·m peak wheel torque
  • 95% peak efficiency · IP67 · air or liquid cooled
Drive unit details
Motor Platforms

Co-developed

Motor Platforms

Twenty PMSM platforms co-developed with a listed traction-motor manufacturer, from 0.7 kW to 220 kW peak.

  • Stator Φ85 to Φ220
  • 48–600 V · air, oil or water cooling
  • Up to 17,000 rpm
Request motor data
CTC Technology

Next generation

CTC Technology

Battery pack, 3-in-1 drive unit and control electronics in one structure, configured for each OEM model.

  • Battery pack as the load-bearing chassis
  • Up to 50% lower vehicle development cost
  • 60% fewer harnesses and interfaces
Platform details

Product Lines

Browse by product line and voltage

Motor Controllers

T-Series sine-wave FOC controllers for PMSM/BLDC motors, T-150 to T-2200, up to 2,200 A peak phase current.

Browse controllers

3-in-1 E-Drive

Motor, controller and reducer in one housing: 5, 10 and 30 kW classes, up to 95% peak efficiency.

Browse 3-in-1 drives

48–72 V Series

Controllers for 48–72 V battery systems in electric motorcycles, three-wheelers and light EVs.

Browse 48–72 V

72–96 V Series

High-voltage T-1500 and T-2200 controllers for 72/84/96 V systems, with SIN/COS feedback.

Browse 72–96 V

Inside the 3-in-1

Motor, controller and reducer, engineered as one

A 40-second teardown of our 3-in-1 drive unit: the mid-mounted motor, the helical-gear reducer and the controller integrated on top of the housing.

Controller range

T Series motor controllers

Designed in-house for permanent-magnet motors. The model number is the peak phase current in amps.

Voltage
48–72 VdcT-1500 / T-2200: 72/84/96 Vdc
Communication
CAN / RS-485 / UART / SIFBy model
Motor interface
Hall / GMR encoderT-1500 / T-2200 also SIN/COS
Cooling
Air or water cooledT-500–T-2200 both versions; T-150–T-400 air-cooled
Weight
0.95–2.3 kgVaries by rating
T Series motor controller
ModelRated kWPeak kWPeak DC APeak phase A
T-1502.04.5≤ 60≤ 150
T-2603.57.5≤ 80≤ 260
T-3003.57.5≤ 100≤ 300
T-4004.512.0≤ 150≤ 400
T-5008.518.0≤ 250≤ 500
T-60010.021.0≤ 300≤ 600
T-72012.025.0≤ 350≤ 720
T-100018.036.0≤ 500≤ 1,000
T-150027.054.0≤ 750≤ 1,500
T-220040.079.0≤ 1,100≤ 2,200

Peak power rated at 72 Vdc. All ratings run sensored–sensorless dual mode with automatic fallback. Datasheets and the selection guide are free to download.

Download datasheets

Next generation · CTC technology

The battery pack becomes the chassis

Our CTC (cell-to-chassis) technology brings the architecture proven in electric cars to two-wheelers. Battery pack, 3-in-1 drive unit and control electronics form one load-bearing structure, so an OEM builds a new model on a ready platform instead of starting from a bare frame.

Up to 50%
lower vehicle development cost
3 months
development time for a new model
60%
fewer harnesses and interfaces
System voltage
72–400 V
Battery capacity
8–17 kWh
Drive power
15–70 kW
Charging
AC 7–11 kW · DC up to 30 kW
Protection
IP68 · IPX9K
Integrated in the pack
BMS · DC-DC · PDU · MCU · VCU · reducer

Every parameter is configurable per vehicle program. Available to OEM partners as a platform project.

Discuss a Platform Project
Electric motorcycle prototype built on Vector CTC technology
Customer prototype built on Vector CTC technology
Structural battery tray with integrated drive unit
Structural pack with integrated drive unit
Prototype vehicle structure built on CTC technology
Prototype structure during build

Applications

One drive platform, many vehicles and machines

The same controller and motor platform is adapted with new ratios and brackets for each duty cycle, from urban delivery to off-road, marine and turf.

Electric Motorcycles & Micro EVs

5 – 30 kW

Electric Motorcycles & Micro EVs

High-speed two-wheelers and light quadricycles, served by 3-in-1 drive units, T Series controllers and vehicle electronics.

Off-Road Electric Motorcycles

5 – 30 kW

Off-Road Electric Motorcycles

Enduro and trail e-motorcycles that need instant torque, precise low-speed throttle control and sealed, lightweight drive units.

Three-Wheelers & Tuk-Tuks

0.8 – 8 kW

Three-Wheelers & Tuk-Tuks

Cargo delivery, passenger service and auto-rickshaws: high continuous current, hill-start torque and smooth low-speed control.

UTV & ATV

20 – 100 kW

UTV & ATV

Higher-power Φ180 and Φ220 motor platforms for off-road, leisure and farm use.

Electric Boats

5 – 30 kW

Electric Boats

Quiet, IP67-protected propulsion for leisure and light marine craft.

Ride-on Mowers & Utility Machines

3 – 10 kW

Ride-on Mowers & Utility Machines

Automotive-grade drive control for turf, garden and light industrial equipment.

Fuel-to-electric conversion

Converting petrol motorcycles and three-wheelers

The 3-in-1 drive unit bolts onto the original engine mounting points and keeps the vehicle's brakes, rims and chassis, giving fleet operators, battery-swap programs and conversion workshops a fast route to electric. Retrofit configurations run at 48–72 Vdc with 2–6 kW peak power.

3-in-1 drive unit details

Technology

The software layer, developed in-house

Three core algorithms let one hardware set drive almost any permanent-magnet motor on any road, backed by patented protection and thermal design.

Adaptive PID self-learning

Re-tunes in real time to terrain, ride mode and load for steadier torque and less wasted energy.

Sensored + sensorless dual mode

PLL and sliding-mode observer with automatic MTPA tuning, and instant sensorless fallback if a position sensor fails.

1-minute motor identification

Least-squares parameter ID learns Ld, Lq, flux, Rs, pole pairs and Hall offset of a new motor in under a minute.

Patented protection

Stall thermal derating, duty-adaptive field weakening, air and liquid cooling structures: 16 patents filed, 6 already granted.

Manufacturing

Engineered and built under one roof

A 3,000 m² production and R&D base, with product engineering and smart production side by side and the core engineering team on site full-time.

Production and R&D base

Production and R&D base

Smart manufacturing centre

Smart manufacturing centre

Engineering offices

Engineering offices

Meeting and showroom area

Meeting and showroom area

Working with us

From requirement to volume supply

01

Requirements

Share your vehicle or machine, battery and performance targets. Our engineers propose a drive configuration.

02

Samples & calibration

We supply samples and calibrate the controller to your motor and duty cycle.

03

Validation

Joint testing on your platform, with engineering support through each iteration.

04

Volume supply

Stable batch production with low-volume customisation and fast iteration.

Start a project

Tell us what you are electrifying.

Share your specifications and target volumes. Our team will reply with a recommended configuration and datasheets.